Acer AC100 사양 - 페이지 5
{카테고리_이름} Acer AC100에 대한 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Acer AC100 10 페이지.
페이지 인쇄
Acer AC100 Server Specifications
Technical specifications
®
PCIe
specifications
The primary I/O bus for the main board is PCIe Gen2. The following table lists the characteristics of the
PCI-E bus segments. Details about each bus segment follow the table.
NOTE: The signaling bit rate of PCI Express is 2.5Gbit/s one direction per lane for Gen 1 and 5.0Gbit/s one
direction per lane for Gen 2.
Expansion
Number
slot
PCIe x8
1
NOTE:
1. Indicates the number of physical electrical lanes running to a PCIe
2. Default bus assignment (in decimal). Inserting cards with PCI™ bridges may alter the actual bus
assignment number.
3. Slots are enumerated differently based on the operating system. Microsoft® operating systems
enumerate Device ID by bus starting from the lowest bus to the highest.
Onboard storage specifications
Item
Controller
Simultaneous drive transfer
channels
Max throughput per channel
Data transfer method
Drive type supported
RAID levels support
RAID function support
RAID OS support
Additional features
Onboard LAN specifications
Item
Controller
1
Type
Bus width
PCIe Gen2
x8
Description
Intel C206 onboard controller
4 x onboard SATA ports
1 x eSATA port
3 Gb/s
Non-RAID mode
•
RAID mode
•
Serial ATA
RAID 0, 1, 10, 5 (Intel software RAID)
•
NOTE: Intel software RAID only supports Windows OS
Supports multiple logical volumes
Setup through ROM based Array Configuration Utility Installation
scripting support
NOTE: This controller does not support hot plug or LED functions
• Windows Small Business Server 2011 Essentials
• Windows Server
• Windows Server 2008 R2
• Windows Server 2003
NCQ (Native Command Queuing)
•
AHCI (Advanced Host Controller Interface)
Description
Intel PHY 82579LM
Voltage
Connector
3.3V
x8
®
connector.
®
2008
Location
Length
Onboard
low-profile
5