Apogee S2-131-SS 소유자 매뉴얼 - 페이지 12

{카테고리_이름} Apogee S2-131-SS에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Apogee S2-131-SS 15 페이지. Red - far-red sensors

MAINTENANCE AND RECALIBRATION

Blocking of the optical path between the target and detector can cause low readings. Occasionally, accumulated

materials on the diffuser of the sensor can block the optical path in three common ways:

1. Moisture or debris on the diffuser.

2. Dust during periods of low rainfall.

3. Salt deposit accumulation from evaporation of sea spray or sprinkler irrigation water.

Apogee Instruments Red - Far-Red sensors have a domed diffuser and housing for improved self-cleaning from

rainfall, but active cleaning may be necessary. Dust or organic deposits are best removed using water, or window

cleaner, and a soft cloth or cotton swab. Salt deposits should be dissolved with vinegar and removed with a cloth

or cotton swab. Salt deposits cannot be removed with solvents such as alcohol or acetone. Use only gentle

pressure when cleaning the diffuser with a cotton swab or soft cloth, to avoid scratching the outer surface. The

solvent should be allowed to do the cleaning, not mechanical force. Never use an abrasive material or abrasive

cleaner on the diffuser.

Although Apogee sensors are very stable, nominal calibration drift is normal for all research-grade sensors. To

ensure maximum accuracy, recalibration every two years is recommended. Longer time periods between

recalibration may be warranted depending on tolerances. See the Apogee webpage for details regarding return of

sensors for recalibration (http://www.apogeeinstruments.com/tech-support-recalibration-repairs/).

As a general reference, red photon flux density is approximately 145-160 mol m

density is approximately 130-145 mol m

near 1.1.

-2

-1

on a clear summer day near solar noon, yielding a red / far-red ratio

-2

-1

and far-red photon flux