Apogee SQ-300 Series 소유자 매뉴얼 - 페이지 9
{카테고리_이름} Apogee SQ-300 Series에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Apogee SQ-300 Series 17 페이지. Quantum sensor
Apogee SQ-300 Series에 대해서도 마찬가지입니다: 소유자 매뉴얼 (2 페이지)
페이지 인쇄DEPLOYMENT AND INSTALLATION
Mount the sensor to a solid surface with the nylon mounting screw provided. To accurately measure PPF
incident on a horizontal surface, the sensor must be level. An Apogee Instruments model AL-100 leveling
plate is recommended for this purpose. To facilitate mounting on a cross arm, an Apogee Instruments
model AM-110 mounting bracket is recommended.
In addition to orienting the cable to point toward the nearest pole, the sensor should also be mounted
such that obstructions (e.g., weather station tripod/tower or other instrumentation) do not shade the
sensor. Once mounted, the green cap should be removed from the sensor. The green cap can be
used as a protective covering for the sensor, when it is not in use.
To minimize azimuth error, the sensor should be mounted
with the cable pointing toward true north in the northern
hemisphere or true south in the southern hemisphere.
Azimuth error is typically less than 1 %, but it is easy to
minimize by proper cable orientation.
9