Apogee 21054010 사용 설명서 - 페이지 9
{카테고리_이름} Apogee 21054010에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Apogee 21054010 13 페이지. Blot transfer systems
페이지 인쇄5.0 CARE AND HANDLING
5.1 MATERIALS AND CARE
Each apparatus is fabricated from high quality formed PVC/Acrylic and machined acrylic plastic. Both
have very good heat, impact, and chemical resistance but will not withstand autoclaving or dry-heat
sterilization.
All components may be washed with water and a detergent. To remove grease and oils, use a hexane,
kerosene, or aliphatic naphtha. Never use abrasive cleaners, window sprays, or any fluid that may
contain toluene, methylene chloride, phenol, acetone, benzene, halogenated hydrocarbon solvents, or
undiluted laboratory alcohols.
For replacement parts, call your distributor or Apogee Technical Support.
5.2 GENERAL SPECIFICATIONS
Type
Dimensions (W × L x H)
Weight
Gel Dimensions
Construction
5.3 TECHNICAL SUPPORT AND SERVICE
Should you have any problems with this unit, please contact:
Apogee Designs, Ltd.
Attn: Electrophoresis Support
101 Kane Street
Baltimore, MD 21224 USA
Phone: 443.744.0368
Fax:
410.633.3666
Email:
5.4 INSTRUCTIONS FOR RETURN SHIPMENT
IMPORTANT:
Before sending the unit back to us, it is absolutely necessary to call our Technical
Support department to get authorization to return products!
Return only defective devices. For technical problems which are not definitively recognizable as
device faults please contact Apogee Technical Support.
Apogee Electrophoresis | 101 Kane Street | Baltimore, MD 21224 USA | apogeephoresis.com
H11.14 Casting System
17.6 23.2 cm
0.37 kg
11 x 14 cm
PVC/Acrylic, acrylic
9 to 5PM EST, Monday through Friday
H20.25 Casting System
26.7 x 34.0 x 5.6 cm
0.72 kg
20 x 25 cm
PVC/Acrylic, acrylic