Apogee MI-230 소유자 매뉴얼 - 페이지 7
{카테고리_이름} Apogee MI-230에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Apogee MI-230 16 페이지. Mi series infrared temperature meter
페이지 인쇄
7
DEPLOYMENT AND INSTALLATION
The mounting geometry (distance from target surface, angle of orientation relative to target surface) is determined by the
desired area of surface to be measured. The field of view extends unbroken from the sensor to the target surface. Sensors
must be carefully mounted in order to view the desired target and avoid including unwanted surfaces/objects in the field of
view, thereby averaging unwanted temperatures with the target temperature (see Field of View below). Once mounted, the
green cap must be removed. The green cap can be used as a protective covering for the sensor, when it is not in use.
An Apogee Instruments model AM-210 mounting bracket is recommended for mounting the sensor to a cross arm or pole.
The AM-210 allows adjustment of the angle of the sensor with respect to the target and accommodates the radiation shield
designed for all MI series infrared radiometers.