4D systems gen4-uLCD-28PT 시작하기 매뉴얼 - 페이지 19

{카테고리_이름} 4D systems gen4-uLCD-28PT에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 4D systems gen4-uLCD-28PT 20 페이지. Intelligent display modules

GLOSSARY

1. 4D Programming Cable – is a USB to Serial-TTL UART converter cable.

The cable provides a fast and simple way to connect all of the 4D devices

that require TTL level serial interface to USB.

2. 4D-UPA – a universal programmer designed to work with multiple 4D

Systems display modules.

3. Embedded System – is a programmed controlling and operating system

with a dedicated function within a larger mechanical or electrical system,

often with real-time computing constraints. It is embedded as part of a

complete device often including hardware and mechanical parts.

4. Female Header – is a connector attached to a wire, cable, or piece of

hardware, having one or more recessed holes with electrical terminals

inside.

5. Micro USB cable – a type of cable used to connect the display to a

computer.

6. microSD Card – a type of removable flash memory card used for storing

information.

7. Processor – is a small chip that resides the 4D Systems displays. Its basic

job is to receive input and provide the appropriate output.

8. Programming Adaptor – used for programming 4D Systems display

modules, interfacing to a breadboard for prototyping, interfacing to

Arduino and Raspberry Pi interfaces.

9. Resistive Touch Panel – is a touch-sensitive computer display composed of

two flexible sheets coated with a resistive material and separated by an air

gap or microdots.

10. uUSB-PA5-II – a USB to Serial-TTL UART bridge converter designed to

work with 4D Systems display modules. It provides the user with multi

baud rate serial data up to 3M baud rate.

gen4-uLCD-XXPT - GETTING STARTED MANUAL