Apogee PSX-100 애플리케이션 노트 - 페이지 2

{카테고리_이름} Apogee PSX-100에 대한 애플리케이션 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. Apogee PSX-100 2 페이지. High-density recording to pro tools 24 with apogee’s psx-100 a/d/a converter
Apogee PSX-100에 대해서도 마찬가지입니다: 사양 (2 페이지)

페이지 인쇄
Apogee PSX-100 애플리케이션 노트
be output from the D/A converter only (and the A/D converter will
function normally). In DIGITAL COPY mode, the Pro Tools tracks will be
output from all the digital outputs and the analog outputs (the A/D
converter is not functional in this mode).
2. Make sure that the "x2Fs" LED is lit indicating that the unit is in FAST
mode.
3. For D/A INPUT, select AES 1 and AES 2. In FAST mode, just selecting
one or the other will automatically select both.
4. Play back the Pro Tools tracks.
Pro Tools
Interface
Connecting the PSX-100 to your Pro Tools interface: Simply connect the two AES outputs of the
PSX-100 to the first two AES inputs on your interface; and connect the PSX-100's AES outputs to
receive signals from the first two outputs of the Pro Tools unit. That's it!
Apogee Electronics Corporation
AES IN
1–2 3–4
AES OUT
96 kHz with Pro Tools
AES OUT
1–2 3–4
AES IN
PSX-100 Application Notes
Page 2 of 2