Apogee Rosetta 800 연결 매뉴얼
{카테고리_이름} Apogee Rosetta 800에 대한 연결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Apogee Rosetta 800 1 페이지. Connnects
Apogee Rosetta 800에 대해서도 마찬가지입니다: 데이터시트 (2 페이지)
ApogeeConnnects
Apogee
Hardware Connections
Analog Outputs
(p/n DA8-IFC)
Analog Inputs
(p/n AD8-IFC)
Hardware Settings
Select desired
sample rate
Notes
1) The 002's ADAT I/O supports sample rates up to 48 kHz.
2) In the Pro Tools software, under Hardware Setup, set Clock Source to ADAT.
3) In Pro Tools, select inputs ADAT 1-8 to receive signals from the Rosetta 800's analog inputs;
select outputs ADAT 1-8 to send signals to the Rosetta's analog outputs.
4) In Pro Tools, select the S/PDIF output to send signals to the MiniDAC's analog outputs.
: Rosetta 800 - MiniDAC - Digi 002, 001
S/PDIF
WE-RR-1.0
Analog
24-Bit
S/PDIF CX
Optical (Toslink)
Cables
Analog Outs
(WE-XX-5.0)
ADAT