Apogee Digidesign MBox 설정 매뉴얼
{카테고리_이름} Apogee Digidesign MBox에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Apogee Digidesign MBox 1 페이지. Connnects
ApogeeConnnects
Apogee
Hardware Connections
Hardware Settings
Set for
Set for desired
desired gain
sample rate
(up to 48kHz)
Software Settings
After making all the hardware connections, open Pro Tools
software. Under Setups select Hardware Setup.
In the Hardware Setup page, set Clock Source to S/PDIF,
and set Ch. 1-2 Input Source to S/PDIF.
As configured above, Pro Tools software inputs are routed
from the Mini-Me's hardware inputs, and Pro Tools software
ouputs are routed to both the MiniDAC's and MBox's
hardware outputs. Also, note that the MiniMe's DIR-USB
and MON knobs are not used.
: MiniMe - MiniDac - Digidesign MBox
Mic Input
(WE-XX-5.0)
S/PDIF
WE-RR-1.0
S/PDIF
WE-RR-1.0
S/PDIF CX
Analog Outs
(WE-XX-5.0)