Apogee Instruments S2-412 소유자 매뉴얼 - 페이지 9

{카테고리_이름} Apogee Instruments S2-412에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Apogee Instruments S2-412 20 페이지.

DEPLOYMENT AND INSTALLATION

Mount the upward-looking sensor to a solid surface with the nylon mounting screw provided to prevent galvanic

corrosion. To accurately measure irradiance incident on a horizontal surface, the sensor must be level. An Apogee

Instruments model AL-100 Leveling Plate is recommended to level the sensor when used on a flat surface or being

mounted to surfaces such as wood. To facilitate mounting on a mast or pipe, the Apogee Instruments model AL-

120 Solar Mounting Bracket with AL-100 Leveling Plate is recommended.

Nylon Screw: 10-32x3/8

Model AL-120

Model AL-100

To minimize azimuth error, the sensor should be mounted with the cable pointing toward true north in the

northern hemisphere or true south in the southern hemisphere. Azimuth error is typically less than 1 %, but it is

easy to minimize by proper cable orientation.

In addition to orienting the cable to point toward the nearest pole, the sensor should also be mounted such that

obstructions (e.g., weather station tripod/tower or other instrumentation) do not shade the sensor. Once

mounted, the green cap should be removed from the sensor. The green cap can be used as a protective covering

for the sensor when it is not in use.