Apogee Instruments SQ-645 소유자 매뉴얼 - 페이지 12
{카테고리_이름} Apogee Instruments SQ-645에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Apogee Instruments SQ-645 16 페이지. Quantum light pollution sensor
Apogee Instruments SQ-645에 대해서도 마찬가지입니다: 소유자 매뉴얼 (16 페이지)
Low Light Measurements
Accurate low light measurements are required in flowering and light pollution studies. Research indicates
flowering can be triggered in some plants at photosynthetic and/or far-red photon flux densities less than 0.1 mol
-2
-1
m
s
. The threshold photon flux density at which flowering is triggered is variable among species. Two of the
most light-sensitive species are Poinsettias and Cannabis. For reference, photon flux density of moonlight when
the moon is full and near the minimum zenith angle is 0.005 mol m
-2
-1
s
.
The model SQ-620 Extended Range Quantum Sensor can measure a photon flux density range of 0-4000 mol m
-2
-1
s
. The model SQ-640 Quantum Light Pollution Sensor is designed for low light measurements and can only
measure a photon flux density range of 0-200 mol m
(the sensor will output values beyond, 200 mol m
-2
-1
-2
-1
s
s
,
but these are beyond the linear range of the sensor) and is referred to as the low light version. The sensitivity of
the SQ-640 is twenty times higher than the sensitivity of the SQ-620 (1 mV per mol m
-2
-1
s
versus 0.05 mV per
mol m
-2
-1
s
) to provide greater measurement resolution under low light conditions. For example, if the photon
flux density were 0.1 mol m
-2
-1
s
, the SQ-640 would output 0.1 mV, whereas the SQ-620 would output 0.005 mV.