Apogee Instruments SQ-648 소유자 매뉴얼 - 페이지 13

{카테고리_이름} Apogee Instruments SQ-648에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Apogee Instruments SQ-648 16 페이지. Quantum light pollution sensor

MAINTENANCE AND RECALIBRATION

Dust or organic deposits are best removed using water or window cleaner and a soft cloth or cotton swab. Salt

deposits should be dissolved with vinegar and removed with a soft cloth or cotton swab.

Blocking of the optical path between the target and detector can cause low readings. Occasionally, accumulated

materials on the diffuser of the upward-looking radiometer and in the apertures of the downward-looking

radiometer can block the optical path in three common ways:

1. Moisture or debris on the diffuser (upward-looking) or in the apertures (downward-looking).

2. Dust during periods of low rainfall.

3. Salt deposit accumulation from evaporation of sea spray or sprinkler irrigation water.

Apogee Instruments upward-looking sensors have a domed diffuser and housing for improved self-cleaning from

rainfall, but active cleaning may be necessary. Dust or organic deposits are best removed using water, or window

cleaner, and a soft cloth or cotton swab. Salt deposits should be dissolved with vinegar and removed with a cloth

or cotton swab. Salt deposits cannot be removed with solvents such as alcohol or acetone. Use only gentle

pressure when cleaning the diffuser with a cotton swab or soft cloth, to avoid scratching the outer surface. The

solvent should be allowed to do the cleaning, not mechanical force. Never use an abrasive material or cleaner on

the diffuser.

It is recommended that two-band radiometers be recalibrated every two years. See the Apogee webpage for

details regarding return of sensors for recalibration

recalibration-repairs/).

(http://www.apogeeinstruments.com/tech-support-