Apogee Instruments SU-300 UV-B 소유자 매뉴얼 - 페이지 12

{카테고리_이름} Apogee Instruments SU-300 UV-B에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Apogee Instruments SU-300 UV-B 19 페이지. Ultraviolet index & ultraviolet-b sensor

페이지 인쇄
Apogee Instruments SU-300 UV-B 소유자 매뉴얼

OPERATION AND MEASUREMENT

Connect the sensor to a measurement device (meter, datalogger, controller) capable of measuring and displaying
or recording a millivolt signal. An input measurement range of approximately 0-2 mV is required to cover the
entire range of the SU-300 UV-I/UV-B sensor. To maximize measurement resolution and signal-to-noise ratio, the
input range of the measurement device should closely match the output range of the UV sensor. DO NOT connect
the sensor to a power source. The sensor is self-powered and applying voltage will damage the sensor.
Wiring for SU-300
White: Output Signal
Black: Ground
Clear: Shield