Apogee Instruments MQ-650 소유자 매뉴얼 - 페이지 18

{카테고리_이름} Apogee Instruments MQ-650에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Apogee Instruments MQ-650 20 페이지. Underwater epar meter

Error Codes and Fixes

Error codes will appear in place of the real-time reading on the LCD display and will continue to flash until the

problem is corrected. Contact Apogee if the following fixes do not rectify the problem.

Err 1: battery voltage out of range. Fix: replace CR2320 battery and perform master reset.

Err 2: sensor voltage out of range. Fix: perform master reset.

Err 3: not calibrated. Fix: perform master reset.

Err 4: CPU voltage below minimum. Fix: replace CR2320 battery and perform master reset.

Modifying Cable Length

Although it is possible to splice additional cable to the separate sensor of the appropriate MQ model, note that the

cable wires are soldered directly into the circuit board of the meter. Care should be taken to remove the back

panel of the meter in order to access the board and splice on the additional cable, otherwise two splices would

need to be made between the meter and sensor head. See Apogee webpage for further details on how to extend

sensor cable length: (http://www.apogeeinstruments.com/how-to-make-a-weatherproof-cable-splice/).