APOINT ACNP0120C 기술 매뉴얼 - 페이지 9
{카테고리_이름} APOINT ACNP0120C에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. APOINT ACNP0120C 14 페이지. Video conferencecamera sd version; hd version
페이지 인쇄APOINT VIDEO CONFERENCE CAMERA SECTION
RS-485 wiring diagram
The connection between one or more cameras, the Control Station and the optional joystick is sequential
with two wires, with the first camera that connects with the second, the second with the third and so on;
the connection of the proper RS-485 wire to the camera and to the Control Station has to be done through
the supplied installation accessories
SD Camera
In the five pins terminal for RS-422 and RS-485 connection supplied with the
camera, connect the RS485+ wire to PIN 3 and the RS485- wire to the PIN 4
HD Camera
In the four pins terminal supplied with the camera -in combination with
the breakout cable that needs to be connected to the VISCA OUT
connector in the rear of the camera-, connect the RS485+ wire to PIN
R+ and the RS485- wire to PIN R-
Control Station
In the Moxa connector supplied with the Control Station, connect the RS485+ wire to
PIN 1 and the RS485- to PIN 2
8
rev.10.2_010717
NexusPub has been realized with technological contribution of
www.nexuspub.net