Dascom DP-510 운영자 매뉴얼 - 페이지 11

{카테고리_이름} Dascom DP-510에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dascom DP-510 19 페이지. Thermal printers
Dascom DP-510에 대해서도 마찬가지입니다: 빠른 설정 지침 (2 페이지)

The Status Indicator at the front of the printer has a number of color combinations, which repeat in up to a 4-phase

pattern to provide status information (see table below).

In summary, if the indicator is constant green it indicates that the printer is operating normally from its battery pack.

Flashing on and off indicates that Spooling mode is active and no printing can take place. Orange advises the

battery is being charged. Red warns of a low battery or other problem.

No light indicates that the unit is in sleep mode, has a discharged battery, or the battery is not connected.

Status Indicator Pattern Table

Pattern

Constant Green

Fast Flashing Green

Long Green - Short Red

Short Green - Short Red

Short Green - Long Orange

Long Orange Flashing

Fast Flashing Red

No light

(Spooling Mode may have resulted from Paper Out or Paper Door Open conditions)

Although this table may seem complicated, few applications will produce many of the combinations.

Other Status Indicator Patterns

Other patterns may be programmed into the printer by the system designer.

Please refer to the Programmer's Manual for details of how to configure these functions.

STATUS INDICATIONS

Battery

Running

Battery Low

Trickle Charging

Error Condition

Discharged, or in sleep mode

Buffer Mode

Normal

Spooling *

Normal

Spooling *

Normal

Spooling *

Spooling (Printing prohibited)