Dascom DP-520 사용자 설명서 - 페이지 6
{카테고리_이름} Dascom DP-520에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dascom DP-520 12 페이지. Wired printer
Dascom DP-520에 대해서도 마찬가지입니다: 운영자 매뉴얼 (19 페이지), 빠른 설정 지침 (2 페이지), 빠른 설정 지침 (2 페이지)
페이지 인쇄
The Status Indicator at the front of the printer has a number of color combinations, which repeat in up to a
4-phase pattern to provide status information (see table below).
In summary, if the indicator is constant green it indicates that the printer is operating normally. Flashing
on and off indicates that Spooling mode is active and no printing can take place. Red warns of a low
power supply voltage or other problem.
No light indicates that the unit is off.
Status Indicator Pattern Table
Pattern
Constant Green
Fast Flashing Green
Long Green - Short Red
Short Green - Short Red
Fast Flashing Red
No light
*
(Spooling Mode may have resulted from Paper Out or Paper Door Open conditions)
Although this table may seem complicated, few applications will produce many of the combinations.
Other Status Indicator Patterns
Other patterns may be programmed into the printer by the system designer.
Please refer to the Programmer's Manual for details of how to configure these functions.
4
STATUS INDICATIONS
Power Status
Running
Running
Low Voltage
Low Voltage
Error Condition
Printer is Off
Buffer Mode
Normal
Spooling *
Normal
Spooling *
Spooling (Printing prohibited)