Acer Altos T350 F4 사용자 설명서 - 페이지 11

{카테고리_이름} Acer Altos T350 F4에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Acer Altos T350 F4 23 페이지.

Hardware diagnostic testing

This section provides a detailed approach to identifying a hardware problem and its cause.

Caution: Before disconnecting any peripheral cables

from the server, turn off the system and any

peripheral devices. Failure to do so can cause

permanent damage to the system and/or the

peripheral device.

Turn off the system and all external peripheral devices.

Disconnect all peripheral devices from the system, except for the keyboard and the

display monitor.

Make sure the system power cord is plugged into a properly grounded AC outlet and in

the power supply module cord socket.

Make sure the display monitor and keyboard are correctly connected to the system.

Turn on the display monitor.

Set the display brightness and contrast controls to at least two thirds of their maximum

range.

Refer the documentation that came with your display monitor.

If the operating system normally loads from the hard drive, make sure there is no

diskette in floppy drive and no disc in the optical drive.

If the power indicator is lit, attempt to boot from a disc.

Turn on the system.

如果控制面板上的電源指示燈不亮，請參閱「電源指示燈不亮」。

As POST determines the system configuration, it tests for the presence of each mass

storage device installed in the system. As each device is checked, its activity indicator

should turn blue briefly. Check the activity indicators for the hard drive(s), DVD-ROM drive,

and any other 5.25" device you may have installed.

If any of these indicators fail to light up, refer to related problems listed in the Specific

problems and corrective actions section.