Apollo REACH WIRELESS RW1300-211APO 빠른 시작 매뉴얼
{카테고리_이름} Apollo REACH WIRELESS RW1300-211APO에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Apollo REACH WIRELESS RW1300-211APO 4 페이지. Sounder vad base
페이지 인쇄
REACH Wireless®
Sounder VAD Base
Product overview
Product
Part No.
Digital Communication
Approvals
Product information
The RW1300-210APO and RW1300-211APO are wireless
analogue addressable sounder VAD bases that can be used
as a stand-alone notification device (with a blanking cap, see
next page) or as a combined solution with a REACH Wireless
detector.
• Compatible only with REACH Wireless
• 16 number of tone settings (primary and secondary
for alert and evacuation), selectable via on-board DIL
Switches
• Four Volume Settings
• Bi-directional wireless communication
• Dual channel redundancy
• Five year battery life
• Five year product warranty
36 Brookside Road, Havant
Hampshire, PO9 1JR, UK.
MANAGEMENT
MANAGEMENT
SYSTEMS
SYSTEMS
Assessed to ISO 9001:2015
Assessed to ISO 14001:2015
Cert/LPCB ref. 010
Cert/LPCB ref. 010 EMS
REACH Wireless Sounder VAD
Base
RW1300-210APO (White Flash)
RW1300-211APO (Red Flash)
Apollo protocol compatibility is
handled via the Loop-Interface device,
RW1700-030APO.
See product for more detail.
Tel: +44 (0)23 9249 2412
Email: enquiries@apollo-fire.com
Fax: +44 (0)23 9249 2754
Web: www.apollo-fire.co.uk
PRODUCT
CT
CERTIFICATION
TION
© Apollo Fire Detectors Ltd 2022
Cert/LPCB ref. 010
Technical data
All data is supplied subject to change without notice. Specifications
are typical at 24 V, 25°C and 50% RH unless otherwise stated.
Number of Tone Pairs
16 (see table 7)
Volume Levels
Four volume settings
Sound Output (Typical)
88 - 91 dBA (tone dependant)
VAD Coverage Rating (EN54-
Configurable (see table 4)
25)
Flash Rate
0.5 Hz
Communication Range
100 m (in open space)
between Loop-Interface and
Devices
Field Device Radio Frequency
22 pairs
Channel Pairs
Radiated Power
14 dBm (25 mW)
Battery Type
2x VARTA CR123A Lithium 3 V,
1250mAh typical
Battery Lifespan
Five years in normal operation with
good signal strength (no dropped
messages)
Operating Temperature
-10°C to +55°C
Maximum Relative Humidity
95%
(non-condensing)
IP Rating
IP 21C (Type A Indoor Use)
Standards and approvals
EN54-3, EN54-23, EN54-25
Dimensions
129 mm diameter x 54 mm height
Weight (including batteries)
190 g
All information in this document is given in good faith but Apollo
Fire Detectors Ltd cannot be held responsible for any omissions
or errors. The company reserves the right to change the
specifications of products at any time and without prior notice.
PP5104/2022/Issue 1
Page 1 of 4
54 mm
45 mm
129 mm
102 mm