Apollo Spas Explorer 소유자 매뉴얼 - 페이지 8
{카테고리_이름} Apollo Spas Explorer에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Apollo Spas Explorer 20 페이지.
페이지 인쇄- 1. Table of Contents
- 2. Important Safety Instructions
- 3. Placement Information & Access
- 4. Spa Specifications
- 5. Electrical Specifications
- 6. Electrical Instructions
- 7. Start up Instructions
- 8. Draining the Water
- 9. Spa Care & Maintenance
- 9. Filtration System
- 9. Care of the Spa Cover
- 9. Vacation Care Instructions
- 9. Winterizing Your Spa
- 10. Water Maintenance
- 11. Troubleshooting
Electrical Specifications
WARNING!
All electrical hookups must be performed by a licensed electrician! There is a
shock hazard. DO NOT PROCEED with connecting this spa unless you are a
licensed electrician. Any and all information contained herein is for reference
only.
Sub Panel
Wiring Diagram
Example
Electrical Installation Instructions
APOLLO Spas MUST BE WIRED IN ACCORDANCE WITH ALL
APPLICABLE LOCAL ELECTRICAL CODES. ALL ELECTRICAL WORK
SHOULD BE DONE BY AN EXPERIENCED, LICENSED ELECTRICIAN
AND APPROVED BY A LOCAL BUILDING/ELECTRICAL
The electrical supply must satisfy the requirements of the spa as marked on the certification label
which is located adjacent to the spa controller (pack). If the ratings are not legible or cannot be
found, please contact the factory for assistance. - DO NOT GUESS!
WARNING:
Removing or bypassing any GFCI breaker will result in an unsafe spa and will void the spa's warranty.
IMPORTANT:
Should you ever find the need to move or relocate your Apollo spa, it is essential that you understand and apply these
installation requirements. Your Apollo spa has been carefully engineered to provide maximum safety against electric shock.
Remember, connecting the spa to an improperly wired circuit will negate many of its safety features.
From
To Spa
Electrical Box
INSPECTION AUTHORITY.
7
IMPORTANT CONNECTIONS:
Neutral of the GFCI must be
connected to the neutral bus.
Neutral from the spa must be
connected to the breaker.