Dashmate DSH-440 사용자 설명서 - 페이지 6

{카테고리_이름} Dashmate DSH-440에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dashmate DSH-440 17 페이지. 1080p dash camera with 3.0 inch lcd screen & motion detection

페이지 인쇄

• Footage can be manually 'Locked' by pressing the MENU button

while recording.

• The built in microphone can be quickly muted or un-muted in VIDEO

mode by pushing the UP button (the microphone cannot be muted

or un-muted while when the DSH-440 is recording).

• To quickly activate 'Park Mode', quickly push the POWER button

while in VIDEO mode.

• While recording you can quickly switch between 'Night' and 'Day'

lighting modes by pushing the DOWN button.

4. COMPUTER CONNECTION:

Videos and Photos can be retrieved from the DSH-440 by either

connecting the camera directly to your computer using the included

Mini USB Cable or by connecting the Micro SD Card using a Micro SD

Card adapter (not included).

• When you connect the DSH-440 to your computer, your DSH-440

will give you the option of 'Mass Storage', or 'PC Camera'. Select

'Mass Storage'.

• The DSH-440 will now appear on your computer as a Removable

Disk drive.

• Open the file explorer on your computer and find the camera listed as

a removable disk under "Devices"

• Videos and Photos will be stored in the file named "DCIM".

• For smoother video playback, save videos files to your computer.

Mac users may need to download a third party player such as 'VLC' to

play these files as AVI is not natively supported on Apple computers.

5. INTERFACE:

The DSH-440 has three modes, VIDEO, STILL and PLAYBACK. You

can cycle through these modes using the MODE button. Each modes'

respective menu can be accessed by pushing the MENU button. While

in the menu, the UP and DOWN buttons are used to navigate and the

OK button is used to select and confirm. The MODE button is used to

exit the menu.

6. SET TIME AND DATE:

It's important to have your time and date set correctly as it will record

directly onto your video stream and is critical information to prove your

case to insurance companies etc. To set the time on your DSH-440

follow the directions below.

• Ensure you are not currently recording. If the red record indicator is

flashing at the top left of the DSH-440's screen, push the OK button

to stop recording.

• Push the MENU button twice, taking you to the SETUP menu.

• Using the DOWN button highlight the setting named Date/Time and

push OK.

• Use the UP and DOWN buttons to cycle through the numbers and