Daspi Big Foot 2200 사용 설명서 - 페이지 6

{카테고리_이름} Daspi Big Foot 2200에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Daspi Big Foot 2200 13 페이지. Gear motor for sliding door
Daspi Big Foot 2200에 대해서도 마찬가지입니다: 사용 설명서 (15 페이지)

페이지 인쇄

eneral safety rules

Our compliments for your excellent choice. Your new

electromechanical barrier has been produced according to a high

quality and strict reliability, that's why it will assure you long-

lasting performance. This booklet will offer you all the pieces of

information you may need to install your barrier and to safe guard

your safety.

All our products have been made in conformity with the

regulations in force. We recommend using original part only,

during the installation and the upkeep. however, the caution

is unquestionably indispensable and nothing is better than

preventing accidents.

Mportant

Any installation or repair, or adjustment of the working machinery

by unqualified people is strictly prohibited unless all the necessary

precautions: power supply disconnected (included possible

batteries). All moving mechanism must be provided with suitable

protections.

DASPI is not responsible for any possible damages or injuries to

people, object or animals, caused by any use not provided for

this booklet and/or any unauthorized modification of the product.

Keep scrupulously this booklet enclosing it with technical brochure

of installation in a suitable place well-know by all the interested

people. You have to operate the elimination of the packing

material (cardboard, plastic, polystyrene, etc.) in conformity with

the regulations in force, remembering that for a child a plastic

envelope could be extremely dangerous. You have to teach the

people employed in using the automation about the control and

ecurity

echanisM

distance

in MouVeMent

prodUcT

The gear motor BIG FOOT has been planned and

built in order to opening domestic or industrial

sliding gates with a weight from 1.200 kg to 2.200

kg, in conformity with the version verifiable on the

box or on the registration number. DASPI is not

responsible for any anomalous and different use of

the gear motor BIG FOOT.

imporTANT: The gear motor BiG FooT is not

provided with mechanical clutch and must be

installed with its dASpi control panel or with a

control panel provided with electronic clutch.

USE oF ThE AUTomATioN

As the automation can be controlled from the

distance through a remote control, you must always

check the full efficiency of all the safety devices. We

recommend inspecting periodically (every 6 Month)

by qualified people the adjustment of the electronic

clutch.

If you need to calibrate the protection consult the

paragraph "Adjustment of the electronical clutch" in

the instruction booklet of the electronic central unit.

englIsH

o not install the

lectric shocK

autoMation in place Full

oF explosiVe Moistures

security systems of the installation.Don't install this product in

explosive places.

pkeep

For any kind of upkeep, you have always to cut off the power

supply. For a correct upkeep of the installation where you

have installed the gear motor BIG FOOT follow carefully these

instructions:

Clean periodically the photocells.

Checking by qualified people the electronic clutch (see the

paragraph "Installation of the electronic central unit").

Lubrificate periodically the guide and the wheel of the gate.

In case of malfunction going and seeing qualified people.

eMolition

You have to operate the elimination of the materials in conformity

with the regulations in force. All material must be divided by type

(copper, aluminium, plastic, electrical central unit). However there

are not material considered dangerous for the handler.

isMantling

In order to dismantle or to move away the automation, follow

these instructions:

Cut off the power supply and disconnect the electrical

installation.

Dismantle the control console and all the other components of the

installation.

If you have noticed that some components have been damaged,

you have to replace them.

the GloVes

prELimiNAry chEckS

• Read carefully the instruction.

• Check that the product has not been damage

during the transport.

• Check that the gate structure is strong and that

during its movement there aren't friction points.

• Check that your product is adequate to the weight

of the gate.

• Check that the electrical installation is in

accordance with the characteristic required by the

gear motor.

• Check that there is a suitable ground safety system

and that the metallic parts of the installation is

connected.

• Check that the manual manoeuvre always is easily

practicable.

• Remember that the automation makes easy the

use of the gate but don't resolve the problems

due to a defective installation or to a faulty of

upkeep.

LUBriFicATioN

The gear motor BIG FOOT is provided with permanent

lubrification

se Glasses

eep the protection

For WeldinG

carter