Daspi Epo-Open 2 900 사용 설명서 - 페이지 6

{카테고리_이름} Daspi Epo-Open 2 900에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Daspi Epo-Open 2 900 13 페이지. Swing gates operator

페이지 인쇄

eneral safety rules

Our compliments for your excellent choice. Your new

electromechanical barrier has been produced according to a high

quality and strict reliability, that's why it will assure you long-

lasting performance. This booklet will offer you all the pieces

of information you may need to install your barrier and to safe

guard your safety.

All our products have been made in conformity with the

regulations in force. We recommend using original part only,

during the installation and the upkeep. However, the caution

is unquestionably indispensable and nothing is better than

preventing accidents.

Mportant

Any installation or repair, or adjustment of the working

machinery by unqualified people is strictly prohibited unless all

the necessary precautions: power supply disconnected (included

possible batteries). All moving mechanism must be provided

with suitable protections.

DASPI is not responsible for any possible damages or injuries

to people, object or animals, caused by any use not provided

for this booklet and/or any unauthorized modification of the

product. Keep scrupulously this booklet enclosing it with

technical brochure of installation in a suitable place well-know

by all the interested people. You have to operate the elimination

of the packing material (cardboard, plastic, polystyrene, etc.) in

conformity with the regulations in force, remembering that for a

child a plastic envelope could be extremely dangerous. You have

to teach the people employed in using the automation about the

ecurity

ecHanisM

distance

in MouVeMent

ProduCt

The gear motor EPO has been planned and built in

order to opening swing gates with leaves length

max 3 mt. and with a maximum weight of 200 kg.

DASPI is not responsible for any anomalous and

different use of the gear motor EPO.

IMPOrTANT: The gear motor EPO is not provided

with mechanical clutch and must be installed with

its DASPI control panel or with a control panel

provided with electronic clutch.

use oF tHe autoMatIon

As the automation can be controlled from the

distance through a remote control, you must always

check the full efficiency of all the safety devices. We

recommend inspecting periodically (every 6 Month)

by qualified people the adjustment of the electronic

clutch. If you need to calibrate the protection consult

the paragraph "Adjustment of the electronical clutch"

in the instruction booklet of the electronic central

unit.

englIsH

o not install tHe

lectric sHocK

autoMation in place full

of explosiVe Moistures

control and security systems of the installation.Don't install this

product in explosive places.

pkeep

For any kind of upkeep, you have always to cut off the power

supply.

For a correct upkeep of the installation where you have installed

the gear motor EPO follow carefully these instructions:

Clean periodically the photocells.

Checking by qualified people the electronic clutch (see the

paragraph "Installation of the electronic central unit").

Lubrificate periodically the guide and the wheel of the gate.

In case of malfunction going and seeing qualified people.

eMolition

You have to operate the elimination of the materials in conformity

with the regulations in force. All material must be divided by type

(copper, aluminium, plastic, electrical central unit). However

there are not material considered dangerous for the handler.

isMantling

In order to dismantle or to move away the automation, follow

these instructions:

Cut off the power supply and disconnect the electrical

installation.

Dismantle the control console and all the other components of

the installation.

If you have noticed that some components have been damaged,

you have to replace them.

tHe gloVes

PrelIMInary CHeCks

• Read carefully the instruction.

• Check that the product has not been damage

during the transport.

• Check that the gate structure is strong and that

during its movement there aren't friction points

• Check that the electrical installation is in

accordance with the characteristic required by the

gear motor.

• Check that there is a suitable ground safety system

and that the metallic parts of the installation are

connected.

• Check that the manual manoeuvre always is easily

practicable.

• Remember that the automation makes easy the

use of the gate but don't resolve the problems

due to a defective installation or to a faulty of

upkeep.

lubrIFICatIon

The gear motor EPO is provided with permanent

lubrification

se glasses

eep tHe protection

for Welding

carter