Daspi ULTRA 사용 설명서 - 페이지 6

{카테고리_이름} Daspi ULTRA에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Daspi ULTRA 15 페이지. Gear motor for sliding door

페이지 인쇄

ENERAL SAFETY RULES

Our

compliments

for

your

electromechanical barrier has been produced according to a high

quality and strict reliability, that's why it will assure you long-lasting

performance. This booklet will offer you all the pieces of information

you may need to install your barrier and to safe guard your safety.

All our products have been made in conformity with the

regulations in force. We recommend using original part only,

during the installation and the upkeep. However, the caution is

unquestionably indispensable and nothing is better than

preventing accidents.

MPORTANT

Any installation or repair, or adjustment of the working

machinery by unqualified people is strictly prohibited unless all

the necessary precautions: power supply disconnected

(included possible batteries). All moving mechanism must be

provided with suitable protections.

DASPI is not responsible for any possible damages or injuries to

people, object or animals, caused by any use not provided for this

booklet and/or any unauthorized modification of the product. Keep

scrupulously this booklet enclosing it with technical brochure of

installation in a suitable place well-know by all the interested people.

You have to operate the elimination of the packing material

(cardboard, plastic, polystyrene, etc.) in conformity with the

regulations in force, remembering that for a child a plastic envelope

could be extremely dangerous.You have to teach the people employed

in using the automation about the control and security systems of the

installation.Don't install this product in explosive places.

ECURITY

ECHANISM

IN MOUVEMENT

DISTANCE

PRODUCT

The gear motor ULTRA has been planned and built

in order to opening industrial sliding gates with a

weight till 5.000 kg. It's an operator with a power

supply of 380 Vac three-phase and have a

mechanical clutch in oil bath. DASPI is not

responsible for any anomalous and different use of

the gear motor ULTRA.

IMPORTANT: The gear motor ULTRA is

provided with mechanical clutch and must be

inspecting periodically (every three months

aprox.) by qualified people.

USE OF THE AUTOMATION

As the automation can be controlled from the

distance through a remote control, and because of

the big weigth of the gates, you must always check

the full efficiency of all the safety devices and it's

necessary install a special devices for emergency

stop.

ENGLISH

excellent

choice. Your

new

O NOT INSTALL THE

LECTRIC SHOCK

AUTOMATION IN PLACE FULL

OF EXPLOSIVE MOISTURES

PKEEP

For any kind of upkeep, you have always to cut off the power supply.

For a correct upkeep of the installation where you have installed the

gear motor ULTRA follow carefully these instructions:

Clean periodically the photocells.

Checking by qualified people the mechanical clutch (see the

paragraph "Adjusting of the mechanical clutch").

Lubrificate periodically the guide and the wheel of the gate.

In case of malfunction going and seeing qualified people

EMOLITION

You have to operate the elimination of the materials in conformity with

the regulations in force. All material must be divided by type (copper,

aluminium, plastic, electrical central unit). However there are not

material considered dangerous for the handler.

ISMANTLING

In order to dismantle or to move away the automation, follow these

instructions:

Cut off the power supply and disconnect the electrical installation.

Dismantle the control console and all the other components of the

installation.

If you have noticed that some components have been damaged, you

have to replace them.

THE GLOVES

PRELIMINARY CHECKS

• Read carefully the instruction.

• Check that the product has not been damage

during the transport.

• Check that the gate structure is strong and that

during its movement there aren't friction points.

• Check that the electrical installation is in

accordance with the characteristic required by

the gear motor.

• Check that there is a suitable ground safety

system and that the metallic parts of the

installation are connected.

• Check that the manual manoeuvre always is

easily practicable.

• Remember that the automation makes easy the

use of the gate but don't resolve the problems

due to a defective installation or to a faulty of

upkeep.

LUBRIFICATION

The gear motor ULTRA is provided with permanent

lubrification

SE GLASSES

EEP THE PROTECTION

FOR WELDING

CARTER