APP EM-4202 소유자 매뉴얼 - 페이지 10
{카테고리_이름} APP EM-4202에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. APP EM-4202 17 페이지. Professional digital amplifier
APP EM-4202에 대해서도 마찬가지입니다: 소유자 매뉴얼 (17 페이지)
페이지 인쇄
- 1. Important Safety Instructions
- 2. Installation
- 3. Structure Diagram
- 4. Interface Illustration
- 5. Operation
- 6. Speaker Protection
- 7. Start-Up Procedure
- 8. Operation Front Panel
- 9. Operation Rear Panel
- 10. Core Parameter
- 11. Maintenance
- 12. Packing Directions
- 13. Warranty
- 14. Warranty Card
- 15. Service Information Card
ΣM SERIES PROFESSIONAL POWER AMPLIFIER
3.4.Operation Rear Panel
1
Item Illustration Functions
Power
1
interface
Signal
2
input
Gain
Switch
4
Mode
Switch
Signal
5
Output
2
Power cord: Standard power cord. Power outlet is the 16A polarized plug
with ground which meets the GB 1002-1996 standard.
Input female XLR: The input plug uses the balanced female XLR plug.
When the gain switch is on 1Vrms, the input sensitivity of the amplifier is 1Vrms.
When it is on 32dB, the amplification gain range is within 32dB. When it is on
26dB, the amplification gain range is within 26dB.
STEREO Mode
Channel A and Channel B work independently. The input signal of the CHA
outputs from the CHA output socket and the same as CHB.
MONO Mode
Channel A and channel B work independently. The output of the channel A is
from the input signal A; the input of the channel B is from the input signal A.
BRIDGE Mode
Channel A and channel B work at the same time, and the output is from input
signal A.
Four core SPEAKON speaker socket: When the amplifier is in the Stereo mode,
CHA\CHB will connect through this socket, the method is below: 1+, 1-.
*The renderings are only for reference, and the actual item is the standard.
4
Description
09
4
5