APP EM-4550 소유자 매뉴얼 - 페이지 6

{카테고리_이름} APP EM-4550에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. APP EM-4550 17 페이지. Professional digital amplifier
APP EM-4550에 대해서도 마찬가지입니다: 소유자 매뉴얼 (17 페이지)

페이지 인쇄

ΣM SERIES PROFESSIONAL POWER AMPLIFIER

2.2.Cooling Description

This digital amplifier series is designed according to international 1 U size standards.

The cooling method is: pumping the outside air into inside the unit through the vents of

the front panel, and then bring out the heat through the aluminum radiator in the unit

and then out from the rear panel vents. The "smart" variable speed DC fan is equipped

in the unit, and then it can adjust the wind speed through the temperature detection

and circuit detection for the heat sink module. When the unit inside overheats, it will

adjust the fan speed to increase cooling efficiency immediately.

If any heat-sink overheats, the detection circuit will reduce output power. If the

amplifier overheats, the temperature protection detection circuit and its circuit will

shut down and power off until it cools to a safe temperature.

After using this unit for a period of time (not referring to the turn- on time), if it can not

meet the cooling effect after the fan running with high speed for a long time, please

turn off the machine and remove the mesh enclosure to clean up the dust (only for the

unit with the mesh enclosure design).

The air flow diagram of the unit cooling is shown as below, please ensure that there is

enough space for the fixed installation of the unit.

2.3.Connection mode illustration

2.3.1.Stereo mode connection illustration

*The renderings are only for reference, and the actual item is the standard.

-toPIN1-

+toPIN1+