4EVAC 4E-FMTC 설치 및 사용자 설명서 - 페이지 3

{카테고리_이름} 4EVAC 4E-FMTC에 대한 설치 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 4EVAC 4E-FMTC 17 페이지.

페이지 인쇄

1. Table of Contents

Hacousto Holland bv

Industrieweg 87

2651BC Berkel & Rodenrijs

4E-FMTC installation and user guide

Thank you for choosing 4EVAC as your Voice Evacuation System solution.

4EVAC Compact 500 is all-in-one Voice Evacuation System box. The box contains a completely integrated

Voice Evacuation System, capable of both standalone and network operation. 4EVAC Compact 500 is

certified in accordance with EN54-16 and EN54-4, which are harmonized standards under Construction

Products Regulation, mandatory in the European Union.

1. What is the 4E-FMTC?

4E-FMTC is a desktop/wall mounted microphone station with touchscreen

panel. It can address up to 255 zones and trigger every source or message

available in the entire system. 4E-FMTC features a gooseneck microphone for

general paging and a (behind transparent fireman's door) separate, fully

monitored fireman microphone.

4E-FMTC offers dual mode operation: a paging mode (fireman's door

closed), where only general messages and paging features are available, and

emergency mode (fireman's door open), where emergency messages and

fireman's microphone is available.

4E-FMTC is connected to the L-Net interface of the Compact 500 main unit and may be daisy-chained with

more L-Net devices. The 4E-FMTC is dedicated for call points where both general purpose paging and

emergency evacuation management is necessary. 4E-FMTC includes fault monitoring and EVAC

functionality, thus is suitable as an emergency microphone.

2. Where do I start?

First, make sure that you are officially allowed to access the hardware of Compact 500 system devices. This

is usually the case if:

you are an authorized representative of 4EVAC;

you have been trained by 4EVAC or one of its authorized representatives for installation, service

and commissioning of the Compact 500 Voice Evacuation System.

Unauthorized hardware and/or software modifications are against the law and outside of the

manufacturer's responsibility. If you have doubts about your status and access level permissions, please

contact the 4EVAC main office.

Important note: Access level 3 explanation

Opening the device housing or tampering with network cabling is

restricted. This gives access to all interfaces, internal system

connections and sensitive hardware settings that are of high

importance to system operation mode, hardware reliability and safety

(Access Level 3 according to EN54-16, Annex A). This access level (and

higher) is strictly protected by the manufacturer and reserved only for

service personnel who is trained, approved and officially certified by

the manufacturer. Any actions carried out in Access Level 3 without

manufacturer's explicit approval may lead to incorrect settings or

hardware damage, causing serious system malfunction, and therefore

are strictly prohibited and void manufacturer's warranty.

Page 3 of 17

Author: