4EVAC 4E-FMWB 설치 및 사용자 설명서 - 페이지 12

{카테고리_이름} 4EVAC 4E-FMWB에 대한 설치 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 4EVAC 4E-FMWB 17 페이지.

Hacousto Holland bv

Industrieweg 87

2651BC Berkel & Rodenrijs

4E-FMWB installation and user guide

Global ring is broken (any place in the ring)

Continuous:

At least one device from the network is missing.

5.1.7. Zone indicators

Zone indicators are strictly related to the corresponding zone button. If a button is not attached to any

zone, then the zone indicators for this button are disabled.

5.1.7.1. Red

Indicates that the zone is in EVAC condition, where the zone is occupied by one of the following audio

signals:

Continuous: LIVE EVAC

Blinking slow: EVAC Message.

5.1.7.2. Yellow

Indicates that the zone is transmitting an ALERT message, and/or is in fault state

Continuous: Zone fault (fault of any line / amplifier included in this zone)

Blinking slow: Zone is transmitting an ALERT Message.

5.1.7.3. Blue

Zone busy / zone selection LED.

Continuous: indicates that the zone is manually selected via

the zone selection button on the local panel

Blinking fast: the zone is occupied by an audio signal, but is

in SILENCE mode (triggered by SILENCE input or manual

SILENCE button)

Blinking slow: indicates that the zone is currently transmitting

an audio signal (except BGM) from another device.

Blinking double: indicates that the zone is currently

transmitting an audio signal from this microphone station.

NOTE: BGM transmission is not indicated.

Page 12 of 17

Author:

Zone A

Manual zone control

OFF

Blink slow

Blink double

Blink fast

continuous

LED indication time chart