Appalachian Stove & Fabricators XLB 설치 및 운영 매뉴얼 - 페이지 7

{카테고리_이름} Appalachian Stove & Fabricators XLB에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Appalachian Stove & Fabricators XLB 19 페이지. Zero-clearance

IV . FREESTANDING INSTALLATION

The following components are included with

the Gemini XLB stove freestanding model:

(A) Gemini XLB Unit

(B) Blower Assembly

(D) Damper Spring

(E) Draft Control Knob

(F) Heat Resistant Insulation Rolls

(G) Ash Pan

(H) Pedestal (Optional) (Not Shown)

FIGURE 7-B

FREESTANDING CAUTION TAG

PREVENT CREOSOTE FIRE; INSPECT CHIMNEY

CONNECTOR AND CHIMNEY TWICE MONTHLY AND

CLEAN IF NECESSARY.

DO NOT OVERFIRE; IF UNIT OR CHIMNEY CONNECTION

GLOWS, YOU ARE OVERHEATING.

KEEP FURNISHINGS AND OTHER COMBUSTIBLE

MATERIALS A CONSIDERABLE DISTANCE AWAY FROM

APPLIANCES.

TYPE OF FUEL: WOOD ONLY

FIGURE 7

FREESTANDING STOVE COMPONENTS

Proper preparation and planning of the installation will simplify

the job and help achieve effective operation of the unit.

(A) Select the location for the stove installation. The stove should

be positioned so that the air flows to the rest of the home in the

most direct route possible.

(B) Locate the approximate penetration point of the chimney

structure. Avoid roof areas such as valleys, ridges, dormers and

hips.

If the installation is being made on a combustible floor, place the

floor protector in position. (Section II.)

If you are using the optional freestanding base, attach it at this

time.

Place the stove in position. Check clearances. (Section II).