4F Maschinentechnik Limpar SP-94 운영 매뉴얼 - 페이지 6

{카테고리_이름} 4F Maschinentechnik Limpar SP-94에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 4F Maschinentechnik Limpar SP-94 14 페이지. Slat scraper

3.2 Description
Charger
connection
24 V
Spring
connector
Scraper
implement
Floor
blades

3.3 Technical data

Machine
Working width (cm)
Implement height (cm)
Travel speed (km/h)
Weight (kg)
Motor

3.4 Preparations for commissioning

After removing the machine from its
packaging, swing the steering arm into its
working position and fix it in place by fitting
the bolts in one of the holes in the side
connection pieces. Trapezoid tappets are
welded to the rims of the wheels.
These fit into recesses on the freewheel
mechanism. Pay attention to the direction of
the raised tyre tread!
right)
Bowden control cable
Main unit
Adjustment for
implement angle
Use only the original
charger, otherwise the
batteries can be
damaged!
Limpar SP-94
90
15.5
approx. 3 km/h (depending on the charge level of the batteries)
128
24 Volts DC
(see illustration to the
Height adjustment for
steering arm
Main
electrical
switch
Bolt for
fastening the
steering arm
Switch lever
(traction
drive)
Handle
Steering arm
View from rear
Safety device
(Working
current,
max. 20 A)