Data Harvest 1130 매뉴얼 - 페이지 3

{카테고리_이름} Data Harvest 1130에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Data Harvest 1130 19 페이지. Wireless 20v voltage & current sensor

1130 - Wireless 20V Voltage & Current Sensor

Introduction

Thank you for purchasing the Smart Wireless 20V Voltage & Current Sensor. We pride ourselves on

producing high quality products that meet with the demands of the busy classroom environment. If you

have any problems using this sensor, please read this documentation in full before contacting the Data

Harvest support team.

Overview

The Smart Voltage and Current sensors are USB and Bluetooth compatible. Using Bluetooth, a sensor

can connect to mobile devices, tablets, laptops and desktops.

The Voltage and Current sensor is a combined sensor. It can measure both electric current and the

potential difference across a component in low voltage a.c. or d.c. circuits, or be used as a voltage or

current sensor. Software and firmware will allow the user to show resistance and power values directly

from the sensor, or as derived functions from the calculate function in the software. 

Any number and combination of Voltage and Current sensors can be added into a circuit. The wireless

Voltage and Current sensor is not compatible with the SmartQ Voltage and SmartQ Current sensors.

SAFETY: Never use high voltages or household a.c.

The four 4 mm sockets (2 for Voltage and 2 for Current) allow for connection to most standard available

electronics kits and school based power supplies using 4 mm plug leads (not supplied).

The sensor is supplied with a mini USB lead (1 m standard A to standard mini B).

3 / 19 | Revision: 1.0 | DS157