ABW Cone Genie DS-CG-SRLARGE 지침서

{카테고리_이름} ABW Cone Genie DS-CG-SRLARGE에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. ABW Cone Genie DS-CG-SRLARGE 4 페이지.

Thank You for purchasing the Cone-Genie! We know you

will be amazed at how fast & proficient the Cone Genie is.

Please follow the below instructions to make your use as

simple as possible!

1: Find a convenient location to sit your Cone-

Genie–-close to your waffle maker.

2: Be sure the main control switch is turned

to off.

3: Plug in the GFCI Plug into a nearby outlet.

4: Your unit is set to the normal run time of

around 10 seconds. This can be adjusted

up or down if needed. See instructions

that follow for time adjustment.

5: Prepare your waffle cone & turn the Cone-

Genie switch to AUTO.

6: Pass your hand over the top of the yellow

photo sensor, which will activate the Cone-

Genie.

7: As the Cone-Genie turns insert your flat waffle

cone into the shaping area–follow the

arrows. See next page for diagram.

8: Your cone should be pulled into the device and

continue wrapping until the timer stops.

9: Slide the Shaping Tray to left–-allowing room

for you to remove the cone.

10: Prepare your next cone and make another!

ABW-INNOVATIONS LLC

www.cone-genie.com

INSTRUCTION SHEET

LAHAINA, HI 96761

www.abw-innovations.com

(256) 648-5172