DURKOPP ADLER 8967 사용 설명서 - 페이지 4
{카테고리_이름} DURKOPP ADLER 8967에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DURKOPP ADLER 8967 15 페이지. Preface and general safety information
DURKOPP ADLER 8967에 대해서도 마찬가지입니다: 설치 매뉴얼 (14 페이지)
페이지 인쇄
2. Operating Elements and Their Function
2.1 Elements at the Sewing Head
Element
1
Pressure foot screw
2
Thread regulator
3
Control knob
4
Lever
5
Control knob
6
Lever
7
Adjustment wheel
8
Lever
9
Viewing glass with
11 fill opening
10 Control knob
12 Control knob
13 Hand lever
14 Lever
15 Needle
16 Knob
6
Function
-
This screw is screwed in completely at the factory
and the position may not be changed.
-
Setting the correct thread quantity for different
material thicknesses, sewing yarns and stitch lengths.
-
Setting auxiliary tension for the needle thread.
-
Opening the main needle thread tension and
auxiliary needle thread tension.
-
Setting the main tension for the needle thread
-
Switching the auxiliary tension on and off.
Pull the lever to the right before switching over in or-
der to free it from its catch.
-
Setting the pressure foot stroke.
-
Bobbin thread winding device
-
Show the oil level in the reservoir.
The oil level must be kept above "MIN".
If necessary fill Esso "SP NK 10" up to the "MAX"
marking in the reservoir.
-
Setting the stitch length for sewing forwards.
-
Setting the stitch length for sewing in reverse.
-
Continuous adjustment of the stitch length between
the set forward and reverse stitch lengths.
-
Determining the status of the main needle thread
tension during pressure foot lift.
Lever up: Tension open.
Lever down: Tension closed.
Caution!
Be sure to turn off the main switch when threading or
replacing the needle.
Risk of Injury.
-
Arresting the pressure foot in the raised position.