DURKOPP ADLER 0867 590174 사용 설명서 - 페이지 12

{카테고리_이름} DURKOPP ADLER 0867 590174에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DURKOPP ADLER 0867 590174 16 페이지. Fitting remaining thread monitor for var. kits

페이지 인쇄

Anbauanleitung des Restfadenwächters

für div. Bausätze (siehe Pkt. 1.1)

Instructions for fitting remaining thread monitor

Ausgabe/Edition:

10.2006

for var. kits (see section 1.1)

–

Secure all cable to the bed plate of the thread monitor control

using the fastening clamps 1 and 2.

–

Screw the remaining thread monitor support plate with the

pre-assembled ciruit board on the bed plate (see picture).

Lay the cable in the machine:

–

Lead the cable 4 from thread monitor control to the valve

circuit board through the cable support 3 in the arm of the

machine.

–

Connect the cable 4 (connecting cable to the valve circuit

board) to the connector X24 of the valve circuit board 5.

–

Lead the cable of the light barrier through the holes in the

base plate and fix it to the strand (electric wires, pneumatic

and oil hoses).

–

Roll up the cable left over that is too long and fix it to the bed

plate of the thread monitor control using the cable ties.

Printed in Federal Republic of Germany

(X24)

Teile-Nr./ Part-No.:

0791 867702

Blatt:

von

Sheet: 12

from 16