DURKOPP ADLER 767 - 사용 설명서 - 페이지 10
{카테고리_이름} DURKOPP ADLER 767 -에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DURKOPP ADLER 767 - 16 페이지. Converting bobbin hook clb 300
DURKOPP ADLER 767 -에 대해서도 마찬가지입니다: 사용 설명서 (18 페이지), 설치 지침 매뉴얼 (16 페이지)
페이지 인쇄
Umbauanleitung für Bobbinengreifer CLB 300
Instructions for converting bobbin hook CLB 300
2.1.2
Für Klasse: 767-AE-5-73
2.2
Checking the hook setting
For both classes: 767-FAS-573 and 767-AE-5-73
2.3
Assembling the components
2.3.1
Class: 767-FAS-573
2.3.2
Class: 767-AE-5-73
Änderungsindex
Ausgabe/Edition:
03.2007
Rev. index: 0.0
767-FAS-573 & 767-AE-5-73
–
Remove the slide.
–
Remove the throat plate.
–
Feed dog; remove the front screw and push it to the side.
–
Loosen hook fastening screws and remove the hook.
–
Remove the thread-pulling knife.
–
Remove the counter-knife.
–
Insert the CLB-hook, tighten the fastening screws (first screw
in the direction of rotation on the flat spot).
–
Looping stroke; see appendix (Service instruction
chapter 4.1, p. 15).
–
Needle bar height; see appendix (Service instruction
chapter 4.2, p. 16).
–
Distance between hook and needle; see appendix (Service
instruction chapter 4.3, p. 17).
–
Needle guard; see appendix (Service instruction
chapter 4.4, p. 18).
–
Set the feed dog and tighten the screws.
–
Mount the throat plate.
–
Mount the counter-knife.
–
Mount the thread-pulling knife.
–
Check the bobbin case lifter setting:
Bobbin case opening; see appendix (Service instruction
chapter 6.1, p. 24).
–
Insert bobbin and thread the machine; see bobbin threading
scheme.
–
Insert the slide and close it.
–
Set the feed dog and tighten the screws.
–
Mount the throat plate.
–
Check the bobbin case lifter setting:
Bobbin case opening; see appendix (Service instruction
chapter 6.1, p. 24).
–
Insert bobbin and thread the machine; see bobbin threading
scheme.
–
Insert the slide and close it.
Printed in Germany
Teile-Nr./ Part-No.:
0791 767774
Blatt: 10
von 16
Sheet:
from