DURKOPP ADLER 806 설치 지침 매뉴얼 - 페이지 9

{카테고리_이름} DURKOPP ADLER 806에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DURKOPP ADLER 806 19 페이지.

Electrical connection

4.1

4.2

CAUTION

All work on the electrical equipment of the sewing unit may only be

carried out by skilled electricians or persons specifically trained to do

the job.

The plug must be disconnected from the mains.

Make sure the nominal voltage as indicated on the name plate and the

line voltage are the same.

CAUTION

Before initial operation the step-motor settings must be checked.

Wrong step-motor settings can cause damage to the sewing unit.

–

Remove the cover 1 on the left at the back. (see section 3.2)

–

The parameter switches 04 must all be in the "OFF" position.

–

The power select switch 05 must be in the "F" position.

–

Assemble the cover 1 on the left at the back (see section 3.4).

Ready

Fault

Temp

Over Volt

Low Volt