DURKOPP ADLER H-TYPE ECO Long 추가 지침 - 페이지 10
{카테고리_이름} DURKOPP ADLER H-TYPE ECO Long에 대한 추가 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. DURKOPP ADLER H-TYPE ECO Long 18 페이지. Instructions for replacing the winder
페이지 인쇄
3
Fig. 8: Assembling the new tensioning plate
(1) - Holder
To assemble the new tensioning plate:
1. Unscrew the holder (1) from the carrier (2) of the control.
2. Insert the holder (1) from below into the hole (3) in the machine arm.
8
Assembling the new tensioning plate
WARNING
The tensioning plate may only be assembled by
qualified specialists.
Switch off the machine and disconnect the power
plug before assembling the tensioning plate.
Make sure the power plug cannot be
unintentionally reinserted.
NOTICE
Property damage may occur!
The cables and hoses may become damaged by kinking, crushing
or chafing.
Lay cables and hoses in such a way that they will NOT be kinked,
pinched or chafed.
①
Assembling the new tensioning plate
②
(2) - Carrier
Additional Instructions H-TYPE - 00.0 - 09/2017