DURKOPP ADLER H-TYPE Series 추가 지침 - 페이지 14

{카테고리_이름} DURKOPP ADLER H-TYPE Series에 대한 추가 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. DURKOPP ADLER H-TYPE Series 18 페이지. Instructions for replacing the winder

Fig. 15: Assembling the new tensioning plate

(16) - Connecting cable

11. Slip the connecting cable (16) (marked in red) through the slot and

Fig. 16: Assembling the new tensioning plate

12. Use the plugs to connect the cables with the control:

13. Carefully push the plug down, preventing you from being pinched by

14. Lay cables (14) and (15) and the pneumatic hoses (13) in the same

guide it to the control (9).

white/brown - white/brown (marked in red)

white/brown - white/brown (2-prong plug)

green/white/brown - green/white/brown (3-prong plug)

the arm cover.

way as the old cables, avoiding any wear, crushing and shearing points.

Assembling the new tensioning plate

Additional Instructions H-TYPE - 00.0 - 09/2017

⑯