Acer AT4250B series (프랑스어) 가이드 사용자용 - 페이지 12
{카테고리_이름} Acer AT4250B series에 대한 (프랑스어) 가이드 사용자용을 온라인으로 검색하거나 PDF를 다운로드하세요. Acer AT4250B series 20 페이지. Acer lcd tv user's guide
Acer AT4250B series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 서비스 매뉴얼 (39 페이지)
페이지 인쇄
Adjusting the OSD settings
The OSD can be used for adjusting the settings of your LCD TV.
Press the MENU key to open the OSD. You can use the OSD to adjust the picture quality, audio settings, channel settings and
general settings. For advanced settings, please refer to following page:
Adjusting the picture quality
Adjusting the audio settings
Adjusting the channel management
Adjusting other options
Adjusting the settings
The options available on the OSD may vary depending on the TV signal source. Some digital options may not be
available with an analog signal and vice versa.
12
1
Press the MENU key to bring up the OSD.
2
Using the directional keys, select Picture from the OSD. Then navigate to the picture
element you wish to adjust.
3
Use the left or right keys to adjust the sliding scales.
4
The Picture menu can be used to adjust the current Scenario mode, brightness, contrast,
colour, sharpness and other image-related qualities.
1
Press the MENU key to bring up the OSD.
2
Using the directional keys, select Audio from the onscreen display. Then navigate to the
feature you wish to adjust.
3
Use the left or right keys to adjust the sliding scale. Press OK to save.
4
The Audio menu can also be used to adjust the treble, balance, Sound effects and other
important sound-related settings
1
Press the MENU key to bring up the OSD.
2
Using the directional keys, select Channel management from the OSD.
3
Use the directional keys to navigate the menus.
4
The Channel management menu can be used to adjust frequency, and set the channel
namings.
1
Press the MENU key to bring up the OSD.
2
Using the directional keys, select Options from the OSD.
3
Use the directional keys to navigate the menus.
4
The Options menu can be used to select the picture aspect-ratio mode, set the sleep timer
and reset options.
1
Press the MENU key to bring up the OSD.
2
Using the directional keys, select Settings from the OSD. Then navigate to the feature you
wish to adjust.
3
The Settings menu can be used to adjust the menu language and other important
settings.