DUROFIX RZ4012 정보 매뉴얼 - 페이지 11

{카테고리_이름} DUROFIX RZ4012에 대한 정보 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DUROFIX RZ4012 17 페이지. Oil pulse tool

BATTERY POWER INDICATOR

Trigger the tool and Battery Indicator to show the battery pack's remaining capacity

One light ON: 30% remaining capacity.

Two lights ON: 60% remaining capacity.

All lights ON: 100% remaining capacity.

NOTE

Always check the direction of the rotation before use.

The tool uses hydraulic oil that may not initially provide the fastening force if

the tool is placed at temperatures below 5 °C for extended periods of time. This

can be solved by repetitively cycling the tool on the test fixture to preheat the

pulse unit to the working range.

The tool will allow tightening an average of 6 cycles per minute when average

on a B Joint. Softer joints will require less aggressive duty cycles.

ELECTRONIC CONTROL SWITCH (EC SWITCH)

The EC switch provides safety feature to the user for socket and bolt entry and tentative

fastening.

Half press the trigger, the driver will run in slow speed for socket and bolt entry firstly.

Full press the trigger, the driver will change to fast speed for regular fastening.

To turn the tool on, squeeze the trigger. To turn the tool off, release the trigger (see Fig.

1A).

Your tool is equipped with a brake. The motor will stop as soon as the trigger is fully

released. The EC switch enables you use the best speed for a particular application.

The farther you squeeze the trigger, the tool will operate. For maximum tool life, use

slow speed only for starting fasteners.

NOTE: Continuous use in two speed range is not recommended. It may damage the

EC switch and should be avoided.

OPERATION

FIG. 1