Data-Tronix DT-ATSC-IP-8 사용자 설명서 및 설치 설명서 - 페이지 12

{카테고리_이름} Data-Tronix DT-ATSC-IP-8에 대한 사용자 설명서 및 설치 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Data-Tronix DT-ATSC-IP-8 15 페이지. 8 input atsc/qam to ip processor

Selecting "Reset to Default" will automatically reset all saved settings back to factory default settings. All saved

settings will be lost.

We highly recommend saving your device's setting.

Select Administration tab.

Select backup from the menu.

Locate and name file for future use.

1. Select Administration tab.

2. Select "Choose file" menu.

3. Locate the required file to be imported.

4. Select "Upload settings" to import the selected file into the device.

Note: backup can be imported to assist in setting up new or multiple devices onsite.

Remember to save and backup any and all changes.

Use the Firmware upgrade section to import new FW versions.

Select Administration tab.

Select "Choose file" menu.

Locate the required image file to be imported.

Select "Upload image" to import the selected file into the device.

Note: backup can be imported to assist in setting up new or multiple devices onsite.

Remember to save and backup any and all changes.

NACE:

610-429-1511

| [email protected] | www.datatronix.biz | | DT-ATSC-IP-8 Manual v1.0

****Caution****

Page 12