Data-Tronix DT-ATSC-IP-8 사용자 설명서 및 설치 설명서 - 페이지 3

{카테고리_이름} Data-Tronix DT-ATSC-IP-8에 대한 사용자 설명서 및 설치 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Data-Tronix DT-ATSC-IP-8 15 페이지. 8 input atsc/qam to ip processor

Safety Precautions

The presence of this symbol is to alert the installer and user to the presence of uninsulated dangerous

voltages within the product's enclosure that may be of sufficient magnitude to produce a risk of electric shock.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS DEVICE TO RAIN OR MOISTURE.

DO NOT OPEN THE UNIT. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

 DO NOT apply power to the unit until all connections have been made, all components have been installed

and all wiring has been properly terminated.

 DO NOT terminate, change or uninstall any wiring without first disconnecting the unit's power adapter from

the device.

 This device is supplied with the appropriately rated power supply. The use of any other power supply could

cause damage and invalidate the manufacturer's warranty.

 DO NOT connect the power cord to the device if the power cord is damaged.

 DO NOT cut the power cord.

 DO NOT plug the power cord into an AC outlet until all cables and connections to the device have been

properly connected.

 The device should be installed in an environment consistent with its operating temperature specifications.

Placement next to heating devices and ducts is to be avoided as doing so may cause damage. The device

should not be placed in areas of high humidity.

 DO NOT cover any of the device's ventilation openings.

 DO NOT cover or obstruct the device's fan or fan openings.

 If the device has been in a cold environment allow it to warm to room temperature for at least 2 hours before

connecting to an AC outlet.

This package contains:

 One DT-ATSC-IP-8

 One power cable

 One installation / configuration manual (An eManual will be supplied)

Each unit is shipped factory tested. Ensure all items are removed from the container prior to discarding any packing

material.

Thoroughly inspect the unit for shipping damage with particular attention to connectors and controls. If there is any sign of

damage to the unit or damaged or loose connectors contact your distributor right away.

NACE:

610-429-1511

| [email protected] | www.datatronix.biz | | DT-ATSC-IP-8 Manual v1.0

Page 3