Data-Tronix DT-UPS-500 매뉴얼 - 페이지 2

{카테고리_이름} Data-Tronix DT-UPS-500에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Data-Tronix DT-UPS-500 8 페이지. Dt-ups series

1. 1 Description of Commonly Used Symbols

Some or all of the following symbols may be used in this manual and may appear in your application process.

Therefore, all users should read the form carefully and thoroughly.

1. 2 Safety Instructions

1. Read this manual carefully and thoroughly before operation the UPS and save this manual properly for future

reference.

2. Do not tear up or shatter the alarm table on the UPS and pay attention to it.

3. Please do not overload the UPS.

4. The UPS contains large capacity batteries. The case of the UPS must not be opened by untrained personnel.

Otherwise, it may cause electric shock.

5. Do not short the positive and negative electrodes of battery. Otherwise, it may cause electric shock or fire.

6. Do not plunge or insert any objects into the air vents and other inlets.

7. Do not store or use the device in the following environment:

l Where there is inflammable gas, corrosive agents or heavy dust

l Where the temperature is very high or low (above 40℃/ 104°F or below 0℃/ 32°F ) or the humidity is very high

(more than 90%)

l Under direct sunlight or close to heating facilities

l Place of strong vibrations

8. In the event of fire occurring in the vicinity, please use dry powder fire extinguishers .The use of liquid fire

extinguishing agents may cause electric shock.

Symbol & Description

Symbol

Do not dispose with ordinary trash

Description

Caution, danger

Danger electric shock

Alternating current (AC)

Direct current (DC)

Protective ground

Recycle