DataApex Alltech 3300 ELSD 매뉴얼 - 페이지 7
{카테고리_이름} DataApex Alltech 3300 ELSD에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DataApex Alltech 3300 ELSD 20 페이지. Clarity controls
페이지 인쇄Alltech 3300 ELSD
3 Installation Procedure
3.1 Hardware - Wiring
The Alltech 3300 ELSD detector is controlled by LAN (Ethernet)
communication. It uses standard cross LAN cable for direct connection
with PC and uncrossed LAN cable when connected to a network
hub/switch (however the most of modern switches are able to
automatically adapt to both types of cable).
For connecting the detector with other devices using synchronization
inputs and outputs there is 14-Pin connector available on the backside of
the detector. Pins 1- 2 are Start input, used for starting the detector by
external device, pins 9- 10 accommodate External Output, suitable for
controlling some other device. For detailed description of this connector,
please check the original manual supplied by manufacturer of the
detector.
- 3 -
3 Installation Procedure