DataBay AVE-308TR 사용자 설명서 - 페이지 10
{카테고리_이름} DataBay AVE-308TR에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DataBay AVE-308TR 16 페이지. Vga and audio cat-x av extender
DataBay AVE-308TR에 대해서도 마찬가지입니다: 사용자 설명서 (11 페이지)
페이지 인쇄(3) Function Test: Turn on your AV device, the POWER LED should turn on
green to indicate the Power On status and the LEDs above RJ-45 will blink
before VGA signal is turned On and remain On after VGA signal is turned On.
5.2 Receiver AVE-301R installation and UTP Connection:
(1) Site Selection: Please place Receiver in an appropriate place and have the
UTP cable settled for later connection; you can use magnetic pad to attach
the unit on metal plane or use attachable rack mounting kit to fix the unit
on selected area by screw or nail.
(2) Power Up: Plug power adapter to the Receiver and connect monitor and
speaker to the "VGA OUT" and "AUDIO" port. The POWER LED will turn on
green to indicate the POWER ON status and the LED above RJ-45 port
should blink to indicate the AV signal unconnected status.
(3) Selection of UTP Cable: For best VGA resolution, please use Cat5
Enhanced cable (350MHz bandwidth) for connection, please noted that the
maximum extended length of one section (one pair of Transmitter or
Receiver) should not exceed 300 meters. The connector must be made by
568B/568B type.
PAIR 3
PAIR 2
PAIR1
1
2
3
4 5
Jack Position
(4) Connect UTP Cable:
Installation Diagram of Receiver AVE-301R
The EIA/TIA definition of 568B in the
PAIR4
pin assignment is (1)orange white,
(2)orange, (3)green white, (4)blue,
6
7
8
(5)blue white, (6)green, (7)brown
white, and (8)brown.
10 / 16
VGA and Audio Cat-X AV Extender