Cavalry CADA002SA8 설치 매뉴얼 - 페이지 9

{카테고리_이름} Cavalry CADA002SA8에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cavalry CADA002SA8 13 페이지. Cavalry cada002sa8: install guide
Cavalry CADA002SA8에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지)

페이지 인쇄

5) Now you can connect your CADA-SA8 to the card via the TWO eSATA cables (one

per channel) to both eSATA ports on the PCI Card you installed. On the back of the

CADA-SA8, there are two channels for eSATA—you need to use one cable per

channel. Turn on the CADA-SA8, wait about one minute for the RAID5 controller card

to recognize the drive. You may see a window pop-up that says "New event

detected". If so, click OK to continue. Your RAID5 configuration manager screen

should look similar to this.

If your drive doesn't look like this (perhaps with yellow, red or grey boxes in place of

the green boxes) email customer support: [email protected].

NOTE: for PCI-X users, there would be two columns of blank boxes as well.

If it looks like this, it is set up correctly in a RAID 5 configuration. GO ON TO STEP 6.