ABYSS BATTERY AB-CRG-36V20A 사용자 설명서 - 페이지 12

{카테고리_이름} ABYSS BATTERY AB-CRG-36V20A에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ABYSS BATTERY AB-CRG-36V20A 14 페이지. Onboard marine lithium battery charger

페이지 인쇄

If there is a fault with the charger, please check carefully all external wires whether they are connected

correctly. If it is not wire faulty, you can check indicators' fault codes and their corresponding solutions as

follows:

INDICATOR STATE "."

SHOW PAUSE

Red-Green-Red-Green-Red-Green

Red-Green-Red- - -

Red-Green-Red-Green-

Green-Red- - -

Red-Green- - -

Red-Green-Red-Green-Red

Green-Red-Green- - -

TROUBLESHOOTING:

INDICATION

Without load

Overvoltage or over current

The ambient temperature

is too high or too low

Charger Overheating

Output Under Voltage

Input AC abnormality

Any one of the above-mentioned

faults repeats ﬁve times, then

it appears.

FAULT

Check if these happen: the connection

between battery and charger is loose,

the battery is reversed, or the battery

voltage is too low.

If the error opens again after the restart,

return it to factory repair.

Please check if the ambient temperature

is too high and if ventilation is good and

the position of the battery temperature

sensor.

Please check whether the ambient tempe-

rature is too high and if ventilation is good.

Please return it to the factory.

Please check the input voltage and the

plug's poor contact.

Re-up electricity, match the indicator

state to the above-mentioned faults

then get the corresponding solution.

Lithium Battery Charger User Manual

SOLUTION