DataCard CE870 사용자 참조 설명서 - 페이지 9
{카테고리_이름} DataCard CE870에 대한 사용자 참조 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DataCard CE870 13 페이지. Instant issuance system
페이지 인쇄
Datacard CE870 User Reference Guide
Load the Topping Foil
1.
Unlock and open the embosser supplies door.
2.
Remove the topping foil cartridge and place it on a flat surface with the
spindles facing up.
3.
Remove the new topping foil from its package.
4.
Match the keyed pattern of the blue supply spool hub with the right side
spindle.
5.
Push the supply spool into the spindle until it clicks securely into place.
6.
Roll out and route the foil around the cartridge rollers. Follow the diagram on
the topping foil cartridge.
16
7.
Match the keyed pattern of the silver take-up spool hub with the left side
spindle.
8.
Push the take-up spool into the spindle until it clicks securely into place.
9.
Turn the take-up spool counterclockwise one full turn to eliminate slack.
10. Replace the topping foil cartridge.
i.
Align the cartridge with the guides inside the embosser.
ii.
Slide the cartridge in until it clicks and stops.
11. Close and lock the embosser supplies door.
Load the Topping Foil
17