DataCard CR500 빠른 설치 매뉴얼 - 페이지 4
{카테고리_이름} DataCard CR500에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DataCard CR500 18 페이지. Instant issuance system
DataCard CR500에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (15 페이지)
페이지 인쇄
CR500 Instant Issuance System Quick Install Guide
b. Secure the printer to the work
surface (if required).
For detailed specifications
and instructions, refer to the
CR500 Instant Issuance System
Installation and User Guide.
c. Attach the concealed output
stacker to the printer.
2
Printer Base
Spacer
Work Surface
Washer
Bolt
3. Connect the Power Source
a. Connect the power cord to the
print unit (A).
b. Connect the power supply to the
security enclosure (B)
c. Connect the power cord to the
power supply (C).
d. Connect the power cords (D and
E) to the power source.
e. Power on the printer to release
transport mode. The printer will
beep several times. The release
takes approximately 30 seconds.
f.
Power off the printer.
O 1
On/Off
CR500 Instant Issuance System