DataCard CR805 제품 설명서 - 페이지 4
{카테고리_이름} DataCard CR805에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DataCard CR805 15 페이지. Retransfer card printer
DataCard CR805에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (17 페이지)
페이지 인쇄
Selectable Color Modes
The new CR805 comes standard with three options for color printing.
• True Color (ICC) – prints as close as possible to color in the image file
• Legacy SR/CR – Close as possible match to the SR200, SR300, SR300e card printers
• Vivid – printer colors with higher saturation and contrast.
True Color mode is the default mode when the CR805 card printer is shipped from the factory. For
more information on changing the color mode, refer to the User's Guide or the How-To-Video.
Enhanced Card Durability with two layers of Retransfer film
The CR805 has the option to add an additional layer of retransfer film. This extra layer can be
added on the front and/or the back of the card to extend card life. This provides intermediate
durability for the cards programs that don't need the 1.0 mil patch or the budget does not support
using a laminator and supplies. Using the second layer of retransfer film provided additional
durability for cost of a retransfer film image. IMPORTANT NOTE: A second layer can't be added
if there is a magnetic stripe or signature panel on the card.
Modularity
Additional durability and security options are available by adding
the CR805 Card printer to an inline lamination module. The
CR805 will the same lamination module that's available with the
CD800 today. The CR805 CLM will provide long-lasting durability
with DuraGard 1 mil laminates, to extend the life of the card.
Secure custom or generic holographic designs can be added at
various levels for enhanced security. In addition, the tactile
impression feature can be added, providing additional security
and promoting the customer' brand.
Customers with an existing CD800 CLM can upgrade the print
technology, transitioning from direct-to-card to retransfer printing
by replacement the CD800 with the CR805 on top of the
laminator. The laminator will recognize the new printer, and
appropriate sets are adjusted to support CD800 and laminates or
CR805 and laminates. Load new supplies and it's ready to go!
Note: New supplies will have to be ordered to work with retransfer
printing. The supplies are different than with direct-to-card
printing.
Modularity for Magnetic Stripe Encoding and Smart Cards.
The CR805™ Card Printer is easy to update with smartcard or magstripe encoding options as
card program demands or changes. The outside (skins) of the printer are easily removed, and a
transport module with the encoder already attached can be added quickly and easily snapped
into place within the printer without the use of tools. A full list of upgrade options is listed in the
bid specification portion of this document.
Note: If the CR805 already has an encoder (either magstripe or smartcard), and wants to add
the other, an entirely new upgrade kit will have to be ordered. For example; CR805 has mag
stripe encoding module and customer wants to add smartcard encoding. Order an upgrade kit
that has magstripe and appropriate smartcard encoding option.
Page 4 of 15